Sign Up & Save

HushMat - Peterbilt 362 - Cab Over - Cab & Floor Interior Truck Insulation Kit

$525.00
Manufacturer: Hushmat
SKU: BT-HSH-P362-80002

Make your haul more comfortable with HushMat heavy-duty truck interior insulation kits!

  • Fits Peterbilt 362 Cabover trucks
  • Insulates truck from heat/cold
  • Sound deadening reduces road noise
  • Easy to install - just peel and stick!
  • Reduces heat and vibration 
  • Performs from -30 degrees up to 550+ degrees Fahrenheit
  • Lightweight and super flexible - less than 1/8” thick and less than 1/2 pound per square foot
  • Adhesion is guaranteed - No alcohol or acetone wash needed; no installation tools required
  • Trims easily with standard razor knife or household scissors
  • Installs in half the time versus offshore produced brands
  • Manufactured in the United States of America 
  • HushMat Ultra is proven in an independent study to lower temperature by over 40%.
  • Original Equipment Manufacturer approved - Meets or exceeds automotive damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C – Chrysler

Make your haul more comfortable with HushMat heavy-duty truck interior insulation kits!

  • Fits Peterbilt 362 Cabover trucks
  • Insulates truck from heat/cold
  • Sound deadening reduces road noise
  • Easy to install - just peel and stick!
  • Reduces heat and vibration 
  • Performs from -30 degrees up to 550+ degrees Fahrenheit
  • Lightweight and super flexible - less than 1/8” thick and less than 1/2 pound per square foot
  • Adhesion is guaranteed - No alcohol or acetone wash needed; no installation tools required
  • Trims easily with standard razor knife or household scissors
  • Installs in half the time versus offshore produced brands
  • Manufactured in the United States of America 
  • HushMat Ultra is proven in an independent study to lower temperature by over 40%.
  • Original Equipment Manufacturer approved - Meets or exceeds automotive damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C – Chrysler

FEATURES & BENEFITS:

  • HushMat Ultra effectively treats low frequency, resonant noise from 0 to 1,000 Hz
  • Withstands ambient temperatures from -30 degrees up to +550 degrees Fahrenheit
  • Requires no surface cleaning / preparation or heat guns to install
  • No alcohol or acetone wash needed
  • No installation tools required
  • Trims with standard razor knife or household scissors
  • Self Adhesive peel and stick – no secondary glue - adhesion guaranteed
  • Available in Silver or Black Foil
  • Reduces thermal transfer by over 40%
  • Meets or exceeds damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C - Chrysler
Easier Installation + Better performance = GREAT VALUE!

PRODUCT DETAILS:

HUSHMAT ULTRA is a pressure-sensitive, constrained-layer damper, which has excellent adhesion to many difficult to bond substrates such as oily cold rolled steel, aluminum, steel, fiberglass, automotive coated surfaces, and many plastics including polypropylene. The aluminum foil constraining layer and specially formulated viscoelastic polymer layer combine to give effective vibration damping over a wide temperature range. Ultra is provided in rectangular or square sheets and can be hand-cut for special configurations.

HUSHMAT ULTRA is temperature resistant and will maintain adhesion through all automotive bake cycles including 288°C (550 degrees F) over-bake conditions. This allows its application at any stage of the production cycle. It can be applied to both pre-painted and top-coated metal surfaces. It is compatible with automotive coatings and will not contaminate spray operations. HUSHMAT ULTRA superior adhesion characteristics provide excellent corrosion resistance.

The superior adhesive properties of HUSHMAT ULTRA allow it to be used in horizontal, vertical or inverted applications. It has good conformability and can be applied on complex shapes.

HUSHMAT ULTRA is approved for many automotive specifications. Contact your Hushmat representative for details, and for design and custom application assistance.

TYPICAL PROPERTIES:

COLOR: Polymer - Black
Backing – Aluminum Silver or Black
SPECIFIC GRAVITY: 1.47 (approx. 0.47 pounds per square foot)
THICKNESS: 1.5mm
HARDNESS: 6.5 - 9.0mm. ASTM D-5
R VALUE: 7
SHELF LIFE: At least 6 months when stored at 40°C or less
TEMPERATURE
RESISTANCE:
HUSHMAT ULTRA will withstand a bake of 1 hour at 240°C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
COLD FLEXIBILITY: Can be bent around 25mm. mandrel at -30°C with no cracking or loss of adhesion.
FLAMMABILITY: Tested per FMVSS 302, HUSHMAT ULTRA is self-extinguishing and meets all aspects of the standard.
SAFETY: HUSHMAT ULTRA is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
PEEL STRENGTH: Tested in 90° peel at a crosshead speed of 300mm per minute on a 25mm wide test specimen. Average load in Newtons is reported.
   
PEEL STRENGTH
(N per 25mm width)
  OILY COLD OILY GALVANIZED E-COAT
SUBSTRATE ROLLED STEEL* STEEL* (ED-11)**
After 2 Hours 92 92 77
 
Heat Aged
2 Weeks at 70 Celsius
91 91 84
 
Salt Spray
2 Weeks
83 56 72
 
Humidity
2 Weeks at 100% and 38 Celsius
89 84 88
 
Environmental Cycle
5 Cycles of the following
17 Hours at -30 Celsius
72 Hours at 70 Celsius
24 Hours in Salt Spray
7 Hours at -30 Celsius
17 Hours in Salt Spray
7 Hours at 70 Celsius
24 Hours in Salt Spray
89 91 78
 
* Baked per automotive paint bake schedule - e-coat.
** Unbaked

Secure Shopping
 Secure Shopping
Payment Options
PayPal Acceptance Mark